Investigación científica sobre tecnologías empleadas en quemadores de biomasa tipo pellets a pequeña escala, como potencial energético alternativo: una revisión bibliométrica
DOI:
https://doi.org/10.46842/ipn.cien.v26n1a09Palabras clave:
VOSviewer, calderas de pellets, revisión bibliográficaResumen
La investigación se centra en la implementación de un software de visualización de redes bibliométrica denominada VOSviewer, donde se procesan los registros obtenidos en la literatura científica, identificando los recientes avances en calderas de biomasa (caso de estudio: pellets) a pequeña escala, aplicando una metodología en análisis de redes y vigilancia de bases de datos, desarrollando redes con palabras clave, coautoría y acoplamiento bibliográfico, graficas que permiten visualizar las tendencias y resaltan el comportamiento de la comunidad académica sobre una determinada temática. Los autores con mayor relevancia, recomiendan la adición de caolín en biomasas, pudiéndose disminuir las emisiones contaminantes. También, destacan la implementación de tecnologías que controlen el flujo de aire primario y secundario en la combustión, repercutiendo en una mejora en la eficiencia, todo esto, con la extracción continua de cenizas sin tener que detener o afectar el proceso de combustión y el uso de filtros para material particulado.
Referencias
Z. S. Vásquez et al., “Biotechnological approaches for cocoa waste management: A review,” Waste Manag., vol. 90, pp. 72-83, 2019.
C. Schön, D. Kuptz, R. Mack, V. Zelinski, A. Loewen, H. Hartmann, “Influence of wood chip quality on emission behaviour in small-scale wood chip boilers,” pp. 71–82, 2019.
E. D. Vicente et al., “Emissions from residential pellet combustion of an invasive acacia species,” Renew. Energy, vol. 140, pp. 319–329, 2019.
D. Kuptz et al., “Evaluation of combined screening and drying steps for the improvement of the fuel quality of forest residue wood chips—results from six case studies,” Biomass Convers. Biorefinery, vol. 9, no. 1, pp. 83–98, 2019.
T. Zeng et al., “Impact of adhering soil and other extraneous impurities on the combustion and emission behavior of forest residue wood chips in an automatically stoked small-scale boiler,” Biomass Convers. Biorefinery, vol. 9, no. 1, pp. 99–116, 2019.
R. Mack, D. Kuptz, C. Schön, H. Hartmann, “Biomass and Bioenergy Combustion behavior and slagging tendencies of kaolin additivated agricultural pellets and of wood-straw pellet blends in a small-scale boiler,” Biomass and Bioenergy, vol. 125, no. April, pp. 50–62, 2019.
T. Huelsmann, R. Mack, M. Kaltschmitt, H. Hartmann, “Influence of kaolinite on the PM emissions from small-scale combustion,” Biomass Convers. Biorefinery, vol. 9, no. 1, pp. 55–70, 2019.
N. Dragutinovic, B. Nakomcic-Smaragdakis, S. Djuric, D. Djordjic, “Investigation of additives in combustion of wheat straw pellets in a small scale boiler,” J. Renew. Sustain. Energy, vol. 11, no. 4, p. 43101, Jul. 2019.
S. Feldmeier, E. Wopienka, M. Schwarz, C. Schön, C. Pfeifer, “Applicability of Fuel Indexes for Small-Scale Biomass Combustion Technologies, Part 1: Slag Formation,” Energy & Fuels, vol. 33, no. 11, pp. 10969–10977, Nov. 2019.
S. Ozgen, S. Cernuschi, S. Caserini, “An overview of nitrogen oxides emissions from biomass combustion for domestic heat production,” Renew. Sustain. Energy Rev., vol. 135, p. 110113, 2021.
S. Fournel et al., “Influence of biomass properties on technical and environmental performance of a multi-fuel boiler during on-farm combustion of energy crops,” Appl. Energy, vol. 141, pp. 247–259, 2015.
E. D. Vicente, A. M. Vicente, M. Evtyugina, L. A. C. Tarelho, S. M. Almeida, C. Alves, “Emissions from residential combustion of certified and uncertified pellets,” Renew. Energy, vol. 161, pp. 1059–1071, 2020.
T. Zeng, N. Weller, A. Pollex, V. Lenz, “Blended biomass pellets as fuel for small scale combustion appliances: Influence on gaseous and total particulate matter emissions and applicability of fuel indices,” Fuel, vol. 184, pp. 689–700, 2016.
M. T. Lim, A. Phan, D. Roddy, A. Harvey, “Technologies for measurement and mitigation of particulate emissions from domestic combustion of biomass: A review,” Renew. Sustain. Energy Rev., vol. 49, pp. 574–584, 2015.
J. C. Morán, J. L. Míguez, J. Porteiro, D. Patiño, E. Granada, “Low-Quality Fuels for Small-Scale Combustion Boilers: An Experimental Study,” Energy & Fuels, vol. 29, no. 5, pp. 3064–3081, May 2015.
H. Lamberg, J. Tissari, J. Jokiniemi, O. Sippula, “Fine Particle and Gaseous Emissions from a Small-Scale Boiler Fueled by Pellets of Various Raw Materials,” Energy & Fuels, vol. 27, no. 11, pp. 7044–7053, Nov. 2013.
A. Regueiro, L. Jezerská, R. Pérez-Orozco, D. Patiño, J. Zegzulka, J. Nečas, “Viability evaluation of three grass biofuels: Experimental study in a small-scale combustor,” Energies, vol. 12, no. 7, 2019.
H. Lamberg et al., “Operation and Emissions of a Hybrid Stove Fueled by Pellets and Log Wood,” Energy & Fuels, vol. 31, no. 2, pp. 1961–1968, Feb. 2017.
A. Rincón-Quintero, L. Portillo-Valdés, A. Meneses-Jácome, J. Ascanio Villabona, B. Tarazona Romero, M. Durán-Sarmiento, “Performance Evaluation and Effectiveness of a Solar-Biomass Hybrid Dryer for Drying Homogeneous of Cocoa Beans Using LabView Software and Arduino Hardware,” Recent Advances in Electrical Engineering, Electronics and Energy, oct. 2020, pp. 238-252.
A. Regueiro, L. Jezerská, D. Patiño, R. Pérez-Orozco, J. Nečas, M. Žídek, “Experimental study of the viability of low-grade biofuels in small-scale appliances,” Sustain., vol. 9, no. 10, 2017.
S. Fournel, J. Palacios, S. Godbout, M. Heitz, “Effect of Additives and Fuel Blending on Emissions and Ash-Related Problems from Small-Scale Combustion of Reed Canary Grass,” Agriculture, vol. 5, no. 3, pp. 561–576, 2015.
G. Garrido-Silva, J. Maradey Lazaro, A. Rincón-Quintero, O. Lengerke Perez, C. Sandoval Rodriguez, C. Cardenas-Arias, “Estimation of the Energy Consumption of an Electric Utility Vehicle: A Case Study,” 2021, pp. 257–272.
J. Hrdlička, P. Skopec, T. Dlouhý, F. Hrdlička, “Emission factors of gaseous pollutants from small scale combustion of biofuels,” Fuel, vol. 165, pp. 68–74, 2016.
A. D. Rincón-Quintero et al., “Manufacture of hybrid pieces using recycled R-PET, polypropylene PP and cocoa pod husks ash CPHA, by pneumatic injection controlled with LabVIEW Software and Arduino Hardware,” IOP Conf. Ser. Mater. Sci. Eng., vol. 844, no. 1, 2020.
M. Gehrig, D. Jaeger, S. K. Pelz, R. Kirchhof, H. Thorwarth, W. Haslinger, “Influence of a Direct Firebed Cooling in a Residential Wood Pellet Boiler with an Ash-Rich Fuel on the Combustion Process and Emissions,” Energy & Fuels, vol. 30, no. 11, pp. 9900–9907, Nov. 2016.
S. Kasurinen et al., “Toxicological characterization of particulate emissions from straw, Miscanthus, and poplar pellet combustion in residential boilers,” Aerosol Sci. Technol., vol. 50, no. 1, pp. 41–51, 2016.
A. T. Zosima, L. A. V Tsakanika, M. T. Ochsenkühn-Petropoulou, “Particulate matter emissions, and metals and toxic elements in airborne particulates emitted from biomass combustion: The importance of biomass type and combustion conditions,” J. Environ. Sci. Heal. Part A, vol. 52, no. 6, pp. 497–506, May 2017.
A. Rincón-Quintero, L. Portillo-Valdés, A. Meneses-Jácome, C. Sandoval Rodriguez, W. Rondón-Romero, J. Ascanio Villabona, “Trends in Technological Advances in Food Dehydration, Identifying the Potential Extrapolated to Cocoa Drying: A Bibliometric Study,” Recent Advances in Electrical Eng., Electronics and Energy, 2021, pp. 167-180.
G. Reichert et al., “Impact of oxidizing honeycomb catalysts integrated in firewood stoves on emissions under real-life operating conditions,” Fuel Process. Technol., vol. 177, no. Feb. 2018, pp. 109–118, 2018.
J. G. M. Lázaro, A. D. Rincón-Quintero, C. L. Sandoval-Rodriguez et al., “Design and set up of a pulverized panela machine,” Engineering and Natural Sciences, vol. 9, no. 4, pp. 812–828, 2021.
D. Petrocelli, A. M. Lezzi, “Modeling operation mode of pellet boilers for residential heating,” J. Phys. Conf. Ser., vol. 547, no. 1, 2014.
E. A. C. Quintana, B. E. Tarazona, “Characterization of mechanical vibrations in a metal structure using the transform Cepstrum,” Engineering and Natural Sciences, vol. 9, no. 4, pp. 767–777, 2021.
Descargas
Publicado
Número
Sección
Licencia
Derechos de autor 2022 Instituto Politécnico Nacional
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-CompartirIgual 4.0.